@ -729,7 +729,7 @@ Options lower than 1X can cause artifacts.</source>
< message >
< location filename = "../../src/qt_common/config/shared_translation.cpp" line = "152" / >
< source > Determines how sharpened the image will look using FSR & apos ; s or SGSR & apos ; s dynamic contrast . < / source >
< translation type = "unfinished" / >
< translation > 确 定 使 用 FSR 或 SGSR 的 动 态 对 比 度 时 图 像 看 起 来 有 多 锐 利 。 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/config/shared_translation.cpp" line = "153" / >
@ -878,13 +878,14 @@ Aggressive mode may impact performance of other applications such as recording s
< message >
< location filename = "../../src/qt_common/config/shared_translation.cpp" line = "196" / >
< source > Anti - Flicker < / source >
< translation type = "unfinished" / >
< translation > 防 闪 烁 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/config/shared_translation.cpp" line = "197" / >
< source > Forces GPU fence callbacks to wait for submitted GPU work .
Use with Fast GPU mode , to avoid flicker with lower performance impact . < / source >
< translation type = "unfinished" / >
< translation > 强 制 GPU fence 回 调 等 待 已 提 交 的 GPU 工 作 。
与 快 速 GPU 模 式 一 起 使 用 , 以 避 免 较 低 性 能 影 响 下 的 闪 烁 。 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/config/shared_translation.cpp" line = "199" / >
@ -1656,12 +1657,12 @@ When a program attempts to open the controller applet, it is immediately closed.
< message >
< location filename = "../../src/qt_common/config/shared_translation.cpp" line = "495" / >
< source > Snapdragon Game Super Resolution < / source >
< translation type = "unfinished" / >
< translation > 骁 龙 游 戏 超 级 分 辨 率 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/config/shared_translation.cpp" line = "496" / >
< source > Snapdragon Game Super Resolution EdgeDir < / source >
< translation type = "unfinished" / >
< translation > 骁 龙 游 戏 超 级 分 辨 率 EdgeDir < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/config/shared_translation.cpp" line = "500" / >
@ -3344,7 +3345,7 @@ Would you like to delete the old save data?</source>
< location filename = "../../src/yuzu/configuration/configure_graphics.cpp" line = "224" / >
< source > % < / source >
< comment > FSR / SGSR sharpening percentage ( e . g . 50 % ) < / comment >
< translation type = "unfinished" / >
< translation > % < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/configuration/configure_graphics.cpp" line = "361" / >
@ -6110,7 +6111,7 @@ Please go to Configure -> System -> Network and make a selection.</source>
< message >
< location filename = "../../src/yuzu/bootmanager.cpp" line = "916" / >
< source > This build doesn & apos ; t have OpenGL support . < / source >
< translation type = "unfinished" / >
< translation > 此 版 本 不 支 持 OpenGL 。 < / translation >
< / message >
< / context >
< context >
@ -6360,32 +6361,32 @@ Please go to Configure -> System -> Network and make a selection.</source>
< message >
< location filename = "../../src/qt_common/game_list/model.cpp" line = "285" / >
< source > Name < / source >
< translation type = "unfinished" / >
< translation > 名 称 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/game_list/model.cpp" line = "286" / >
< source > Compatibility < / source >
< translation type = "unfinished" / >
< translation > 兼 容 性 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/game_list/model.cpp" line = "287" / >
< source > Add - ons < / source >
< translation type = "unfinished" / >
< translation > 附 加 内 容 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/game_list/model.cpp" line = "288" / >
< source > File type < / source >
< translation type = "unfinished" / >
< translation > 文 件 类 型 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/game_list/model.cpp" line = "289" / >
< source > Size < / source >
< translation type = "unfinished" / >
< translation > 大 小 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/game_list/model.cpp" line = "290" / >
< source > Play time < / source >
< translation type = "unfinished" / >
< translation > 游 戏 时 间 < / translation >
< / message >
< / context >
< context >
@ -8160,12 +8161,12 @@ Would you like to bypass this and exit anyway?</source>
< message >
< location filename = "../../src/qt_common/config/shared_translation.h" line = "56" / >
< source > SGSR < / source >
< translation type = "unfinished" / >
< translation > SGSR < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/config/shared_translation.h" line = "57" / >
< source > SGSR EdgeDir < / source >
< translation type = "unfinished" / >
< translation > SGSR EdgeDir < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/config/shared_translation.h" line = "61" / >
@ -8256,7 +8257,7 @@ If you wish to clean up the files which were left in the old data location, you
% 1 < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/migration_worker.h" line = "74 " / >
< location filename = "../../src/yuzu/migration_worker.h" line = "73 " / >
< source > Data was migrated successfully . < / source >
< translation > 数 据 已 成 功 迁 移 。 < / translation >
< / message >
@ -9529,34 +9530,36 @@ Only do this if you're 100% sure you want to delete this data.</source>
< message >
< location filename = "../../src/qt_common/util/content.cpp" line = "501" / >
< source > Keys not installed < / source >
< translation type = "unfinished" / >
< translation > 未 安 装 密 钥 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/util/content.cpp" line = "502" / >
< source > Install decryption keys and restart Eden before attempting to install firmware . < / source >
< translation type = "unfinished" / >
< translation > 在 尝 试 安 装 固 件 之 前 先 安 装 解 密 密 钥 并 重 启 Eden 。 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/util/content.cpp" line = "514" / >
< source > Select Dumped Firmware Source Location < / source >
< translation type = "unfinished" / >
< translation > 选 择 已 转 储 的 固 件 源 位 置 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/util/content.cpp" line = "525" / >
< source > Select Dumped Firmware ZIP < / source >
< translation type = "unfinished" / >
< translation > 选 择 已 转 储 的 固 件 ZIP < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/util/content.cpp" line = "542" / >
< source > Firmware cleanup failed < / source >
< translation type = "unfinished" / >
< translation > 清 理 固 件 失 败 < / translation >
< / message >
< message >
< location filename = "../../src/qt_common/util/content.cpp" line = "543" / >
< source > Failed to clean up extracted firmware cache .
Check write permissions in the system temp directory and try again .
OS reported error : % 1 < / source >
< translation type = "unfinished" / >
< translation > 清 理 提 取 的 固 件 缓 存 失 败 。
请 检 查 系 统 临 时 目 录 的 写 入 权 限 然 后 重 试 。
OS 报 告 的 错 误 : % 1 < / translation >
< / message >
< / context >
< context >
@ -10629,66 +10632,66 @@ By selecting "From Eden", previous save data stored in Ryujinx will be
< translation > % 1 可 用 于 下 载 。 < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "78 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "79 " / >
< source > New Version Location < / source >
< translation > 新 版 本 位 置 < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "80 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "81 " / >
< source > All Files ( * . * ) < / source >
< translation > 所 有 文 件 ( * . * ) < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "88 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "128 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "143 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "89 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "129 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "144 " / >
< source > Failed to save file < / source >
< translation > 保 存 文 件 失 败 < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "8 9" / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "90 " / >
< source > Could not open file % 1 for writing . < / source >
< translation > 无 法 打 开 要 写 入 的 % 1 文 件 。 < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "111 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "112 " / >
< source > Downloading . . . < / source >
< translation > 正 在 下 载 . . . < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "111 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "112 " / >
< source > Cancel < / source >
< translation > 取 消 < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "129 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "130 " / >
< source > Could not write to file % 1 . < / source >
< translation > 无 法 写 入 到 文 件 % 1 。 < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "144 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "145 " / >
< source > Could not commit to file % 1 . < / source >
< translation > 无 法 提 交 到 文 件 % 1 。 < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "156 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "157 " / >
< source > Failed to download file < / source >
< translation > 下 载 文 件 失 败 < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "157 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "158 " / >
< source > Could not download from % 1 % 2
Error code : % 3 < / source >
< translation > 无 法 从 % 1 % 2 下 载
错 误 代 码 : % 3 < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "170 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "171 " / >
< source > Download Complete < / source >
< translation > 下 载 完 成 < / translation >
< / message >
< message >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "171 " / >
< location filename = "../../src/yuzu/updater/update_dialog.cpp" line = "172 " / >
< source > Successfully downloaded % 1 . Would you like to open it ? < / source >
< translation > 已 成 功 下 载 % 1 。 您 要 打 开 它 吗 ? < / translation >
< / message >
Eden CI
1 week ago